Schwinn 420 Elliptical 2012 model Assembly Manual page 27

From the Power-Up Mode screen, push START/ENTER and hold for 3 seconds to go to User Setup
Mode. If no User profile is set up, you can add a User. If there is a User profile, you can edit or delete
the User profile.
Note: Push the STOP button to go back to the previous screen or character.
Add User
1. From the Power-Up Mode screen, push START/ENTER and hold for 3 seconds to go to User
Setup Mode. If no User profile is set up, the Console will show the Name prompt.
Note: Use the Increase/Decrease buttons to move through the alphabet. To record each letter,
push the START/ENTER button. Push START/ENTER for a space.
Push and hold START/ENTER to complete the entry and go to the next data prompt. Or you
can tap the START/ENTER button to add spaces until the next data screen appears.
2. Enter your User data on each data screen—Age, Weight, Gender. Use the Increase/Decrease
buttons to adjust the default value, and push START/ENTER to complete each entry and go to
the next prompt.
Note: The default age is 30. The default weight is 150 (lbs).
3. The Console display shows the "Create Custom" prompt. Use the Increase/Decrease buttons
to move to the YES or NO option. To start setup of your Custom Workout, go to YES and push
START/ENTER.
To complete User Setup without a Custom Workout, go to the NO option and push START/
ENTER. Or push STOP. The Console goes back to the Power-Up Mode screen.
4. After you start the Custom Workout setup, the Program Display will show the left column
(workout interval) is active, with a default resistance level of 3. Use the Increase/Decrease
buttons to adjust the resistance level of the active interval. Push START/ENTER to record the
resistance level. The next column to the right becomes active.
Note: The Console display shows the message "N of 20" during setup (N is the current interval).
The maximum number of intervals is 20.
5. Push and hold START/ENTER to complete the Custom Workout setup. The Console goes back
to the CUSTOM prompt. Push STOP to go back to the Power-Up Mode screen.
Edit User
1. From the Power-Up Mode screen, push START/ENTER and hold for 3 seconds to go to User
Setup Mode. If a User profile is set up, the Console will show a prompt to edit the user (EDIT
<Name>) or delete the user (DELETE <Name>). Use the Increase/Decrease buttons to move
through the Edit menu options, and push START/ENTER to make your selection.
27