Basic Menu Setting Procedure - Epson Stylus Pro 7450 User Manual

"NETWORK
SETUP" on page
175

Basic Menu setting procedure

This section describes how to enter Menu mode and make settings
with the buttons on the control panel.
Note:
❏ Press the Pause
and return to the READY state.
❏ Press the Paper Source l button to return to the previous step.
1. Enter Menu mode.
Make sure that READY appears on the LCD panel, and then
press the Menu r button. The first menu appears on the LCD
panel.
"NETWORK SETUP" on
page 175
"IP ADDRESS SETTING" on
page 175
"IP, SM, DG SETTING" on
page 175
"BONJOUR" on page 175
"INIT NETWORK SETTING"
on page 176
button whenever you want to exit Menu mode
DISABLE, ENABLE
AUTO, PANEL
IP ADDRESS
000.000.000.000 -
192.168.192.168 -
255.255.255.255
SUBNET MASK
000.000.000.000 -
255.255.255.000 -
255.255.255.255
DEFAULT GATEWAY
000.000.000.000 -
255.255.255.255
ON, OFF
EXECUTE
The Control Panel
161