Attaching And Removing The Spindle From The Printer - Epson Stylus Pro 7450 User Manual

Attaching and removing the spindle from the
printer
To attach the paper loaded spindle to the printer, follow the steps
below. When you remove the spindle from the printer, clear the
roll paper from the paper insertion slot, then reverse the steps
below.
1. Open the roll paper cover.
2. Make sure that the movable flange is fixed into the end of the
roll paper properly.
3. Hold the roll paper spindle so that the fixed flange is on the
right side. Then place the spindle on the groove on top of the
printer once.
Paper Handling
204