Basic SelecType setting procedure
This section describes how to enter the SelecType mode and make
settings with the buttons on the control panel.
Note:
❏ Press the Pause
mode and return to the READY status.
❏ Press the Paper Source
1. Enter the SelecType mode
Make sure that READY appears on the LCD, and then press the
Menu
2. Select a menu
Press the Paper Feed
desired menu.
3. Set the menu
Press the Menu
item appears on the LCD.
4. Select an item
Press the Paper Feed
desired item.
5. Set the item
Press the Menu
parameter appears on the LCD.
6. Select a parameter
Press the Paper Feed
parameter for the item.
234
The Control Panel
button whenever you want to exit the SelecType
button. The first menu appears on the LCD.
button to set the selected menu. The first
button to enter the selected item. The first
button to return to the previous step.
or Paper Feed
or Paper Feed
or Paper Feed
button to select a
button to select a
button to select a