7
Enter button
Lights
This section describes the functions of the lights on the control
panel.
The lights let you know the status of the printer and the type of
an error when it occurs.
Light
1
Power light
(green)
2
Pause light
(yellow)
Executes the item if the selected item is for
execution only.
When Sheet
is selected, this button ejects
the cut sheet if pressed and held for 3 seconds.
When Roll Auto Cut On
button cuts the paper automatically if pressed
and held for 3 seconds.
When Roll Auto Cut Off
button feeds the paper if pressed and held for
3 seconds. Then the paper is cut using the
manual cutter unit.
When the printer is drying ink, this button stops
the ink drying process and ejects the paper if
pressed and held for 3 seconds.
Description
On:
The printer is on.
Flashing:
The printer is receiving print data or shutting
down.
Off:
The printer is off.
On:
The printer is in the pause mode.
Off:
The printer is ready to print data.
is selected, this
is selected, this
The Control Panel
149