Aligning The Print Head - Epson Stylus Pro 7450 User Manual

Aligning the print head

To prevent deterioration of print quality caused by misalignment
of the print head, align the print head before you start printing
your data. You can align the print head either manually or
automatically. Try the automatic print head alignment first. If the
print head is still misaligned, try to perform the print head
alignment manually.
Aligning the print head automatically
1. Make sure that paper is loaded in the printer.
Note:
For best results in printing the head alignment pattern, use the same
media that you normally use to print your data.
2. Press the Menu r button to enter Menu mode.
3. Press the Paper Feed d button or Paper Feed u button to
display HEAD ALIGNMENT, and then press the Menu r button.
4. When PAPER THICKNESS appears, press the Menu r button.
5. Press the Paper Feed d button or Paper Feed u button to
select STANDARD or a paper thickness value between 0.1 mm
and 1.5 mm. When the paper thickness value is 0.2 mm or
1.2 mm, select STANDARD; otherwise, select the actual paper
thickness value.
6. Press the Enter
7. Press the Paper Source l button, and then press the Paper
Feed d button.
8. When ALIGNMENT appears on the lower row on the LCD panel,
press the Menu r button.
button to register your value.
The Control Panel
178