Code Page; Page Line - Epson Stylus Pro 7450 User Manual

PAGE LINE

You can select whether to print the page line (line along which to
cut off) on roll paper. Select ON if you want to print the page line,
or OFF otherwise.
This operation changes according to the Auto Cut settings.
Paper Source
Roll Auto Cut On
Roll Auto Cut On
Roll Auto Cut Off
Roll Auto Cut Off
Note:
This setting is available for roll paper only.
INTERFACE
You can select an interface to receive your print data. When you
select AUTO, the printer automatically switches between interfaces,
depending on which one is receiving data first. When you select
USB or NETWORK, only the selected interface receives your print
data. If no more print job is received, the printer returns to an idle
state after 10 seconds or more.

CODE PAGE

You can select a code page: PC437 (extended graphics) or PC850
(multilingual).
Print Page Line
On
Off
On
Off
Printer's Operation
Prints a page line on the right
side only, and cuts paper
automatically after the print
job.
Does not print any page lines,
and cuts paper automatically
after the print job.
Prints page lines on the right
side and below the data, but
does not cut paper
automatically after the print
job.
Does not print any page lines
and does not cut paper.
The Control Panel
164