3
Menu button r
4
Paper Source
button l
5
Paper Feed
button d
6
Paper Feed
button u
Enters Menu mode when pressed in the READY
state. When pressed in Menu mode, a desired
menu can be selected.
Enters PRINTER STATUS menu if pressed during
printing.
Cleans the print head if pressed and held for 3
seconds.
Selects a paper source (Roll Auto Cut On
/Roll Auto Cut Off
Returns to the previous level when pressed in
Menu mode.
Enters the cutter replacement mode if pressed
and held for 3 seconds.
Feeds paper in the forward direction.
Changes the parameters in the forward order
when selecting a desired parameter in Menu
mode.
Feeds paper in the reverse direction as much
as the paper has been fed by using the Paper
Feed d button.
Note:
If you have fed the paper forward by hand,
you cannot feed the paper in the reverse
direction by using this button.
Changes the parameter in the reverse order
when selecting a desired parameter in Menu
mode.
/Sheet
)
The Control Panel
148