MAINTENANCE WORK ON FRAME AND ENGINE
Changing the tail light bulb
9.59
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Turn signal (RY10W / socket BAU15s) (
–
Check the turn signal to make sure it is functioning properly.
–
Position the diffuser.
Info
Hook in projection
–
Insert the screw and first turn it counterclockwise until it engages in the thread. Tighten
the screw slightly.
–
Remove nuts
rear.
100599-10
at recess
.
at the bottom of the rear fender and pull out the tail light toward the
p. 190)
130