NordicTrack commercial 2450 Manual page 13

7. Hold the TV assembly near the console assem-
bly, and connect the wires. Insert the excess
wires into the bracket on the TV assembly.
Attach the TV assembly to the back of the con-
sole assembly with four 1/4" x 1 1/4" Screws (7).
Make sure not to pinch any wires. Start all
four Screws, and then tighten them.
8. Raise the Frame (66) to the position shown.
Have a second person hold the Frame until
step 9 is completed.
Orient the Storage Latch (68) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (68)
to the Upright (93) with a 3/8" x 2" Bolt (8) and a
3/8" Nut (10).
7
Console
Assembly
7
8
93
10
Latch
68
Knob
Large
Barrel
13
TV Assembly
Wires
66
8
7