Settings Menu; Units; File Format - Fluke Ti300 User Manual

Settings Menu

The Settings menu has adjustments for user preferences such as units of
temperature measurement, file format of stored data, "save to" location choice,
auto off settings, WiFi and Bluetooth settings, date, time, and language. This
menu also has a section that displays information about the Imager such as
model number, serial number, and firmware versions. Certificates and licenses
are available from this menu.

Units

To change the temperature units:
1. Go to Settings > Units.
2. Push / to highlight an option.
3. Push  to set an option.

File Format

Data can be saved to the internal memory, micro SD memory card, or a USB
flash memory device in different file formats. Image format selections are .bmp,
.jpg, and .is2. These selections remain valid when you turn the Imager off or on.
To change the file format:
1. Go to Settings > File Format.
2. Push / to highlight an option.
3. Push  to set the option.
Images saved in the .is2 file format have the consolidation of all data into a
single file and are more flexible for analysis and modification in the included
SmartView software. This file format consolidates the infrared image,
radiometric temperature data, visible image, voice annotation, and photos from
the IR-PhotoNotes™ photo annotation system into one location.
Thermal Imagers
Menus
35