Micro Sd Memory Card; Sd Memory Card Insertion And Removal - Fluke Ti300 User Manual

Thermal Imagers

Micro SD Memory Card

Micro SD Memory Card
To eject a Micro SD memory card, push in on the exposed edge of the card and
then release. The card should pop partially out after you release it. Carefully
pull the card out of the slot.
To use the Micro SD memory card, make sure that the write-protect lock is
open. See Figure 3. Push the card in until it catches.
The Micro SD memory card comes with an SD adapter for insertion into a PC
or multi-function card reader if desired.
hie03.eps
Figure 3. Micro SD Memory Card Insertion and Removal
For information about how to save data, see page 18. For information about
how to view or erase a stored image, see page 34.
19