Display Graphics Presentation; Logo - Fluke Ti300 User Manual

Outside/Inside Alarm
If you set values for the high-temperature color alarm and a low-temperature
color alarm, the Imager will have the options for inside or outside isotherm color
alarms.
To set an outside/inside isotherm color alarm:
1. Go to Image > Color Alarm > Outside or Inside.
2. Push:
 to set the change and go back to the live view.
 to set the change and go back to the previous menu.
 to cancel the change and go back to the live view.

Display Graphics Presentation

The options for how you view the on-screen graphics are in the Display menu.
These options are Display All, Details and Scale, Scale Only, and Image Only.
To set the display:
1. Go to Image > Display.
2. Push / to highlight an option.
3. Push  or  set a new option.
Features that have ON/OFF controls must be turned on and turned off
with those controls.

Logo

A Fluke logo shows on the display and captured images. You can choose to
turn on or turn off the logo:
1. Go to Image > Logo.
2. Push / to highlight on or off.
3. Push  to set.
With SmartView software you can upload a custom logo to the Imager from
your PC through the USB connection.
Note
Thermal Imagers
Menus
31