Traffic Information (Fm Tuner Only); Frequency Step Setting; Tuner Setup - Kenwood DNX7380BT Instruction Manual

Return to the Top page
Radio, TV

Traffic Information (FM tuner only)

You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio Data
System that includes the TI information.
1
Touch [ ] in the control screen.
The multi function menu appears.
2
Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
50 50

Frequency Step Setting

Change the tuning frequency step. The
original setting is 50 kHz for FM band, and 9
kHz for AM band.
This function is available for models with
region code 4 or 6.
1
While pressing <NAV> button
and <0> button, press <Reset>
button.
While pressing volume knob
and <0> button, press <Reset>
button.
2
Release your fingers from the buttons
after the display appears.
The frequency step changes to 200 kHz
for FM band, and 10 kHz for AM band.

Tuner Setup

You can set tuner related parameters.
This function is available for models with
region code 2 or 3.
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.