Listening Position - Kenwood DNX7380BT Instruction Manual

Listening Position

You can adjust the sound effects according
to your listening position.
1
Touch [Position].
Position screen appears.
2
Select listening position from
[Front R] (Right front), [Front L] (Left
front), [Front All] (All front), [All], and
[User] using [2] and [3].
NOTE
• You can store present setting in memory by
touching [P1], [P2], or [P3] for 2 seconds.
You can also recall the setting by touching
corresponding number.
• The final distance is adjusted to the total of car
type set up value (P.82) and position setup (both
position and position DTA) value.
• If you change the car type set up value (P.82), the
position is set to [All].
• Only the adjusted distance of position setup
(position and position DTA values) is stored in
memory. Therefore, the final adjustment distance
changes if you change the car type set up value
(P.82).
Position DTA Control
You can fine-adjust your listening position.
1
In Position screen, touch [DTA].
2
Select the speaker you wish to adjust
by touching speaker icon.
3
Set DTA as follows.
[2], [3]
Adjust the settings of the DTA position.
Total DTA
The adjusted distance (position and position
DTA values), and the total of the distance
adjusted by Car type (DTA) setup
the adjustment distance for position setup are
indicated.
Return to the Top page
Audio Setting Up
(P.82) and
87