Traffic Information; Search By Program Type; Receive Mode; Itunes Tagging - Kenwood DNX9980HD Instruction Manual

HD Radio™ Listening

Traffic Information

Traffic Information
When a traffic bulletin starts, any source is switched
to the traffic information and it is displayed
automatically.
1 Display the Source Control Screen
See <Source Control Screen> (page 36).
2 Set the Traffic information mode
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
⁄
• It is necessary to have Traffic Information function set
to On in order to have the Traffic Information screen
appear automatically.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it's automatically
the remembered volume.
40 DNX9980HD

Search by Program Type

Search by Program Type
A program is tuned when you set its program type.
(Only when receiving the FM broadcast)
1 Display the Source Control Screen
See <Source Control Screen> (page 36).
2 Enter Program Type Search mode
3 Select a Program Type
1 1 1
1 Program Type is displayed. Touch to select a
Program Type.
[Search] Searches for the program type.
It is displayed when the Program type is
selected.
4 Search a station of the selected Program
Type

Receive mode

Receive mode
Sets the radio broadcasts receive mode.
1 Display the Source Control Screen
See <Source Control Screen> (page 36).
2 Display the Receive mode screen
3 Select the receive mode
[Receive Mode] The Receive mode switches in
the following order.
"Auto": Automatically tunes to analog broadcast
when there is no digital broadcast.
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.

iTunes Tagging

iTunes Tagging
Using an iTunes Tagging enabled HD Radio receiver
you can tag your music. When you hear a song you
enjoy on your local HD Radio station, you only have
to press the [ATT] button for at least 1 second. The
song's information will then be saved on this unit.
The saved songs will then show up in a playlist
called "Purchased" in iTunes the very next time you
sync your iPod to your computer. So then you just
need to click and then easily buy and download
the song you were tagging directly from the Apple
iTunes Music Store.
Registers a tag
1 sec.
"TAG" will be indicated on the display when song
information can be registered.
The memory usage can be checked
1 Display the Source Control Screen
See <Source Control Screen> (page 36).
2 Display the Information Screen
3 The memory usage can be checked
Select the "Tagging Information" display.
⁄
• Up to 50 TAGs (song's information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
English 41