Kenwood DNX7380BT Instruction Manual page 83

Return to the Top page
Audio Setting Up
Car type (DTA) setup
You can setup the car type and speaker
network, etc.
1
Touch [Car Type] in the Audio SETUP
screen.
Car Type screen appears.
2
Select your car type from the list.
NOTE
• If your car type is selected, the Dalay Time
Alignment and Equalizer is set automatically (for
timing adjustment of sound output for each
channel) to have the highest surround effects.
Speaker location setup
1
In the Car Type screen, touch
[Location].
Speaker Location screen appears.
2
Select the speaker locations using
[3].
Front Speaker
Select the location from "Door"/"On
Dash"/"Under Dash. "
Rear Speaker
Select the location from "Door"/"Rear Deck",
"2nd Row"/"3rd Row" (Minivan, Minivan (Long).
82 82
Car type adjust
You can manually set the sound output
timing of each channel.
1
In the Car Type screen, touch [Adjust].
Car Type Adjust screen appears.
2
Touch the speaker you wish to adjust
and set a delay time using [2] and [3]
or slider bar.
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
• The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 S et the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 M easure the distances from the reference
point to the speakers.
3 C alculate the distance difference in
accordance with the farthest speaker.
150cm
+100cm
50cm
80cm
+70cm
+0cm