Radio And Tv Operation; Radio Basic Operation - Kenwood DNX7380BT Instruction Manual

Return to the Top page
Radio, TV
R
adio And TV Operation

Radio Basic Operation

Most functions can be controlled from the source control screen.
NOTE
Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
•
mode (P.89).
Simple Control screen
1
2
3
1 PS name display
Displays the PS name.
2 Information display/Control switching area
Displays the following information.
• [FM1], [AM], [MW], etc.: Band display
• Preset #: Preset number
• MHz/kHz: Frequency display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see Multi function menu
5 Sub function key
Touch to display "Sub function menu" (7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
44 44
4 5
(P.45).
List Control screen
3 4
2
6
7
8
(P.45).