Related Manuals for Kenwood DNX7380BT
Summary of Contents for Kenwood DNX7380BT
- Page 1 DNX7380BT DNX7380BTM DNX5380BT DNX5380 DNX5380M GPS NAVIGATION SYSTEM Quick Start Guide © 2010 Kenwood Corporation All Rights Reserved. B59-2051-00_01 (M/M2/X)
-
Page 2: Table Of Contents
How To Play Movie/Picture actual panels. • In this manual, each model name is How To Listen To The Radio abbreviated as follows. How To Make A Phone Call DNX7380BT and DNX7380BTM: DNX5380BT, DNX5380 and Installation Procedure DNX5380M: If above icons are showed, read the article Before Installation __________________ 23 applicable to the unit you use. Installation Procedure _______________ 24 • In operation procedures, bracket shape... -
Page 3: Precautions
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M Lens fogging recautions When you turn on the car heater in cold weather, dew or condensation may form on 2WARNING the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, To prevent injury or fire, take remove the disc and wait for the condensation the following precautions: to evaporate. If the unit still does not operate normally after a while, consult your Kenwood • To prevent a short circuit, never put or leave dealer. any metallic objects (such as coins or metal Precautions on handling discs tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended • Do not touch the recording surface of the disc. period. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • If you experience problems during installation, consult your Kenwood dealer. • Do not use disc type accessories. • Clean from the center of the disc and move Precautions on using this unit outward. -
Page 4: Cleaning The Unit
Quick Start Guide Acquiring GPS signals How To Reset Your Unit The first time you turn on this unit, you must If the unit or the connected unit fails wait while the system acquires satellite signals to operate properly, reset the unit. for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall Press the <Reset> button. buildings and trees for fastest acquisition. The unit returns to factory settings. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter. -
Page 5: Safety Precautions And Important Information
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M afety Precautions and Important Information Read this information carefully before starting to The navigation system will not display the correct operate the Kenwood Car Navigation System and current position of the vehicle the first time it is follow the instructions in this manual. Neither used after purchase, or if the vehicle battery is Kenwood nor Garmin shall be liable for problems disconnected. GPS satellite signals will soon be or accidents resulting from failure to observe the received, however, and the correct position will instructions in this manual. be displayed. Be careful of the ambient temperature. Using the navigation system at extreme temperatures can lead to malfunction or damage. Also note that 2WARNINGS the unit can be damaged by strong vibration, by To prevent injury or fire, take the following metal objects, or by water getting inside the unit. precautions: • To prevent a short circuit, never put or leave any 2CAUTIONS metallic objects (such as coins or metal tools) inside the unit. Failure to avoid the following potentially • Do not watch or fix your eyes on the unit's... -
Page 6: First Step
Quick Start Guide Map Data Information irst Step One of the goals of Garmin is to provide customers with the most complete and Power on the unit and perform some accurate cartography that is available to us at setup steps before using. a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright Press the <NAV>, <MENU>, or <TEL> messages displayed to the consumer. Virtually button. all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive. The unit is turned on. ●... - Page 7 DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M Touch the corresponding Touch [Finish]. key and set the value. NOTE • For details on operations of each setting, refer to the Instruction Manual. • You can adjust the front panel button (ATT button, etc.) sensitivity of . For details, refer to Panel Switch Sensitivity (P.70) in the Instruction Manual. Language Select the language used for the control screen and setting items. Default is “British English (en)” for models with regional code 2/3/4 and “Chinese“ for model with regional code 6. After setting, touch [Enter]. Angle Adjust the position of the monitor. Default is “0”. After setting, touch [ iPod AV Interface Use Set the terminal which your iPod is connected to. Default is “iPod”. Color Set the screen and button illumination color.
-
Page 8: Basic Operations
Quick Start Guide asic Operations Functions Of The Buttons On The Front Panel DNX7380BT/DNX7380BTM How To Insert An SD Card 1) Press < > button for 3 seconds. The panel fully opens. Labelled side 2) Hold the SD card as the diagram in the right and insert it into the slot until it clicks. - Page 9 DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M Number Name Motion fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.94). • Switches attenuation of the volume on/off. • Pressing for 1 second turns the screen off. ∞, 5 (Vol) Adjusts volume. Holding down a key turns up the volume in series up to 25. For more than 25, pressing the key turns up the volume one by one. • Displays Graphic Equalizer screen (Instruction Manual P.84).* • Pressing for 1 second switches camera view display on/off. • Displays the navigation screen. • Pressing for 1 second switches AV out sources. • When the power off, turns the power on. • Displays the Top Menu screen (Instruction Manual P.16). MENU • Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the Hands Free screen (Instruction Manual P.57). • Pressing for 1 second displays the Screen Control screen. • When the power off, turns the power on. 0 (Eject) • Ejects the disc. • Pressing for 1 second opens the panel to the location of the disc slot. When the panel is opened, pressing for 1 second closes the panel and pressing for 3 seconds ejects the disc forcibly. • When the panel is closed, pressing for 3 seconds fully opens the panel to the location of the SD card slot.
- Page 10 Quick Start Guide DNX5380BT/DNX5380/DNX5380M How To Insert A MicroSD Card 1) Open the microSD card slot cover as Labelled side the diagram in the right. 2) Hold the microSD card with the label facing left and the notched section up, and insert it into the slot until it clicks.
- Page 11 DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M Number Name Motion fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.94). • Displays the Top Menu screen (Instruction Manual P.16). MENU • Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the navigation screen. • Pressing for 1 second switches AV out sources. • Displays the Hands Free screen (Instruction Manual P.57). • Pressing for 1 second turns the screen off. Volume Knob • Pressing switches attenuation of the volume on/off. • Turning adjusts volume up or down. • Pressing for 1 second displays Tone Control screen (Instruction Manual P.85).* SCRN • Displays the Screen Control screen. • Pressing for 1 second displays rear view camera display. Remote • Receives the remote control signal. You can enable or disable this feature by Remote Sensor (Instruction Manual P.69). Sensor • If [Remote Sensor] is set to off, the remote control of TV reception is rejected. 0 (Eject) • Ejects the disc.
-
Page 12: Common Operations
Quick Start Guide Common Operations General There are some functions which can [Menu] be operated from most screens. Returns to the Top Menu screen. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. : D isplays the SETUP Menu screen. : D isplays the Audio Control Menu screen. : D isplays the control screen of current source. Icon feature differs depending on the source. : C loses the menu. -
Page 13: Detaching The Front Panel
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M Detaching The Front Panel You can detach the front panel to prevent theft. Press the <0> button for 3 seconds Detach the panel as the diagram to open the front panel. below. Then, detach the panel as the diagrams below. -
Page 14: How To Use The Navigation System
GPS satellite strength. Finds a destination. Views the map. Adjusts the settings. Uses the tools such as ecoRoute and Help. NOTE • You can get additional information about using the navigation system from Help. To display Help, touch [Tools] and then touch [Help]. • For more information about your navigation system, download the latest version of the Owner’s Manual from manual.kenwood.com/edition/im324. Enter your destination and start the guidance. ● Finding points of interest NOTE 1) Touch [Where To?]. • To enter letters contained in the name, 2) Touch [Points of Interest]. touch [Where To?] - [Points of Interest] - [Spell Name]. 3) Select a category and a • To search for a location in a different area,... - Page 15 Garmin and Kenwood will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs.
-
Page 16: Other Features
● About traffic (For models with region code 3 only) NOTICE • Garmin and Kenwood are not responsible for the accuracy or timeliness of the traffic information. With an FM traffic receiver, the navigation system can receive and use traffic information. -
Page 17: How To Play Music
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M ow To Play Music You can play audio files from music CD, disc media, USB storage device and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. Connect the media you want to play as shown below. Disc 1) Press the <0> button for 1 second to open the front panel. -
Page 18: Search The Track/File You Want To Listen To
Quick Start Guide Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to. Touch [ Basic operations from this screen Plays or pauses:... -
Page 19: How To Play Movie/Picture
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M ow To Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod and picture files from USB storage device. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. Connect the media you want to play. For the method of connecting, see How To Play Music (P.17). -
Page 20: How To Listen To The Radio
Quick Start Guide ow To Listen To The Radio Touch [Menu] on any screen. Top Menu screen appears. Touch [TUNER]. The unit switches to the radio source. Operate on the source control screen. ● Station search 1) Touch [ Sub function menu appears. 2) Touch [AM] or [FM] to select the band. -
Page 21: How To Make A Phone Call
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M ow To Make A Phone Call You can use your Bluetooth cell-phone when paired to this unit. NOTE • To use Bluetooth function of DNX5380/DNX5380M, the optional accessory (KCA-BT300) is necessary. Register your cell-phone to the unit. Follow the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.54) in the Instruction Manual. -
Page 22: Make Or Receive A Phone Call
Quick Start Guide Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Touch [Direct Number]. 2 Enter a phone number with number keys. 3 Touch [ Call using call records 1 Touch [Incoming Calls], [Outgoing Calls], or [Missed Calls]. 2 Select the phone number from the list. 3 Touch [ Redial 1 Touch [Redial] to display the previously called number. 2 Touch [ Call using the phonebook 1 Touch [Phonebook]. -
Page 23: Installation Procedure
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M • If the console has a lid, make sure to install nstallation Procedure the unit so that the faceplate will not hit the lid when closing and opening. • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, Before Installation then replace the old fuse with one with the same rating. Before installation of this unit, please • Insulate unconnected wires with vinyl tape or other similar material. To prevent a short note the following precautions. circuit, do not remove the caps on the ends of the unconnected wires or the terminals. WARNINGS • Connect the speaker wires correctly to the • If you connect the ignition wire (red) terminals to which they correspond. The and the battery wire (yellow) to the car... -
Page 24: Installation Procedure
Quick Start Guide 9 ...1 , DNX5380BT Installation Procedure Supplied accessories First of all, make sure that all 0 ...1 ~ ...6 accessories are supplied with the unit. 1 ...1 5 ...1 - ...1 ! ...1 2 ...1 6* ...1 = ...6 3 ...1 7 ...1... - Page 25 DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M Unit ● Toyota, Nissan or Mitsubishi car = (M5x6mm) or 1 To prevent a short circuit, remove ~ (M5x7mm) the key from the ignition and Car Bracket disconnect the battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the = (M5x6mm) or wiring harness.
- Page 26 Quick Start Guide Attaching the front panel ● Toyota/Scion cars 1) Cut out accessory 0 as illustrated. Hold the front panel securely so as Cutting line not to drop it accidentally. Fit the panel onto the attaching plate until it is firmly locked. Accessory 5 2) Fold double-sided adhesive (accessory -) along the slit...
- Page 27 DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M GPS antenna Microphone unit DNX5380BT GPS antenna is installed inside of 1) Check the installation position of the car. It should be installed as the microphone (accessory 9). horizontally as possible to allow easy 2) Remove oil and other dirt from reception of the GPS satellite signals.
-
Page 28: Removing Procedure
Quick Start Guide Removing the unit NOTE 1) Remove the hard rubber frame by • Install the microphone as far as possible from the cell-phone. referring to step 1 in "Removing the hard rubber frame". Removing Procedure 2) Insert the two removal tools (accessory 4) deeply into the slots on each side, as shown. Removing the hard rubber frame (escutcheon) 1) Engage the catch pins on the... -
Page 29: Connection
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M Connection Connecting wires to terminals (1) Accessory 9 Accessory 7 Accessory 9 Accessory 7 Not available Fuse Fuse Cooling fan Cooling fan (15A) (15A) Accessory 1 Connect to the vehicle’s parking brake detection Speaker impedance: 4-8 Ω switch harness. - Page 30 Quick Start Guide Connecting wires to terminals (2) Ignition key switch Accessory 1 Red (Ignition wire) Car fuse box Yellow (Battery wire) Car fuse box (Main fuse) Black (Ground wire) (To car chassis) Battery Light Blue/Yellow (Steering remote control wire) To steering remote STEERING WHEEL REMOTE CONT...
-
Page 31: System Connection
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M System connection Refer to the box1 below Refer to Refer to the box2 below the box2 below Accessory 2 AV input AV input CA-C3AV CA-C3AV (Optional Accessory) (Optional accessory) Green/Red To Camera Accessory 3 control terminal Green/White Blue/Red To Relay Box... -
Page 32: Optional Accessory Connection
- KCA-iP22F: 0.8 m USB maximum power Accessory ! supply current: 1A (5V) DNX5380 and DNX5380M only KCA-BT300 (Optional Accessory) Conversion adapter (optional accessory) may be necessary for connection of optional accessory. Contact your Kenwood dealer for details. TV Tuner (Optional Accessory) -
Page 33: About This Unit
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M ■ ■ The marking of products using lasers About This Unit CLASS 1 ■ ■ Copyrights LASER PRODUCT • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other The label is attached to the chassis/case and says trademarks and trade names are those of their that the component uses laser beams that have been respective owners. classified as Class 1. It means that the unit is utilizing • The “AAC” logo is a trademark of Dolby Laboratories. laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. • “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has For Turkey been certified by the developer to meet Apple Bu ürün 26891sayılı Resmi Gazete’de performance standards. Apple is not responsible for...