Related Manuals for Kenwood DDX6054
Summary of Contents for Kenwood DDX6054
- Page 1 GPS NAVIGATION SYSTEM DNX7240BT MONITOR WITH DVD RECEIVER DDX6054 INSTRUCTION MANUAL © B64-4365-00/00 (EW/E2W/QW)
-
Page 2: Table Of Contents
How To Use the Character Entry Screen iPod Control Eternal Device Power Supply Control (DNX7240BT) Playback Screen Muting Audio Volume upon Reception of Easy Control Screen Phone Call Source Control Screen iPod List Screen Control Link search (Music file) Screen Control DNX7240BT/DDX6054... - Page 3 Registering Bluetooth Unit Audio Control Registering Bluetooth Unit PIN Code Equalizer Control Bluetooth Unit Connection Graphic Equalizer Setup (DNX7240BT) [AV-IN SETUP] Tone Setup (DDX6054) AV Input Setup Zone Control [AV Interface] Space Enhancer (DNX7240BT) AV Interface Setup Position (DNX7240BT) [Navigation]...
-
Page 4: How To Read This Manual
Next page C ontinue to the next page The instruction continues to the next page. Make sure to flip the page for the rest of the truction. The above operation example with the mark differs from the actual operation. DNX7240BT/DDX6054... - Page 5 About l groups different functions are used in different model groups, the model groups are described as shown below. Names of models included in each model group are as follows: DNX models DNX7240BT DDX models 6054 F unction Icon Icons representing available functions are shown below.
-
Page 6: Before Use
• When you purchase optional accessories, check wipe it again with a clean soft dry cloth. with your Kenwood dealer to make sure that they ¤ work with your model and in your area. -
Page 7: Notes
% : Playback is partly possible. An online manual about audio files is put on the × : Playback is impossible. site, www.kenwood.com/audiofile/. On this online ⁄ manual, detailed information and notes which are not written in this manual are provided. Make sure •... - Page 8 Changing the browse item will display a correct title, etc. • When the iPod is connected to this unit, "KENWOOD" or "✓" is displayed on the iPod to indicate that you cannot operate the iPod. DNX7240BT/DDX6054...
-
Page 9: Region Codes In The World
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. DVD disc marks Operation regulatory marks With this DVD, some functions of this unit such as the Symbol Description play function may be restricted depending on the... -
Page 10: Functions Of The Buttons On The Front Panel
1 sec. (page 11) is activated, this function is Picture in Picture function On/Off.* disabled. DDX models DDX models Displays the Top Menu screen. Turns the power On. Displays the Source Select screen. 1 sec. Turns the power Off. DNX7240BT/DDX6054... - Page 11 Functions of the buttons on the front panel DNX models DNX models Hands Free control On/Off. 1 sec. 7 While watching the navigation screen or playback screen of a visual source ⁄ & Displays the Easy Control screen. When the Picture in Picture function 7 While watching the screen other than the above (page 11) is activated, this function is Screen Switching function On/Off.*...
-
Page 12: Getting Started
(page 8) for connectable \ Page 35 navigation units. \ Page 39 Bluetooth ⁄ • For Disc media, iPod, and USB, the input is switched to the source as the media or the device is set. DNX7240BT/DDX6054... -
Page 13: How To Set A Medium / A Device
Getting Started How to Set a Medium / a Device 7 Disc media Press the [0] button to open/close the front panel. If a disc is already inserted, it is ejected by pressing the [0] button. 7 iPod To disconnect the iPod, stop the playback by touching the [38] button on the source control screen, and then disconnect the iPod. -
Page 14: Basic Operation
While watching the navigation screen The Source Control Screen appears. ⁄ • The screen will return to the navigation screen by The Source Control Screen appears. touching the same part of the Source Control screen. DDX models DDX models DNX7240BT/DDX6054... -
Page 15: How To Display Top Menu Screen
Basic Operation How to Display Top Menu Screen Buttons on the Top Menu screen [NAV V ] Switches to the navigation screen. Top Menu Screen is the entrance to all the [SRC ] Switches to the source control screen functions. You can enter source operation screen of the selected source. -
Page 16: Operation On The Playback Screen Of Visual Sources
Switches TV band. 3 Forward search. 4 Displays source information screen.* • For the function of each touching area, see the pages of each source. * Source information screen ⁄ • The information display is cleared automatically after approximately 5 seconds. DNX7240BT/DDX6054... -
Page 17: How To Display The Easy Control Screen
Basic Operation How to Display the Easy Control Screen Basic operation buttons of the selected source can be displayed on the playback screen of visual sources so that you can control the source without switching the screen. Easy Control Screen Buttons on the Easy Control Screen [∞] Changes the function as follows by touching the [∞] button. -
Page 18: Watching Dvd/Video Cd
Switches to the source control screen to use ⁄ various playback functions. • The information display is cleared automatically after Display the Source Control Screen approximately 5 seconds. See <How to Display the Source Control Screen> (page 14). Operation on the Source Control Screen DVD-VIDEO/DVD-VR DVD-VIDEO/DVD-VR DNX7240BT/DDX6054... - Page 19 Multi Function Video CD Video CD ] Closes the multi function bar. DVD-VIDEO DVD-VIDEO [38] Plays or pauses. [REP] Switches the Repeat Play operations in [7] Stops playing. the following sequence. Title Repeat, Chapter Repeat, Repeat Off When touched twice, the disc is played from [TIME] Switches the play time display in the its beginning when you play it in the next time.
-
Page 20: Dvd-Video Disc Menu
Operation on the Highlight Control Highlight control lets you control DVD Menu by touching the menu button directly on the screen. [Zoom] Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. DNX7240BT/DDX6054... -
Page 21: Dvd-Vr Menu Control
[2], [3], [5], [∞] Scrolls the screen in the [Zoom] Changes the zoom ratio at 4 levels (2 direction you touch. times, 3 times, 4 times, or off ) each time you [Return] Returns to the previous screen. touch. [2], [3], [5], [∞] Scrolls the screen in the [Exit] Exits the Zoom Control screen. -
Page 22: Music Disc/ Audio File Listening & Video File/ Picture File Watching
], [ Audio File Audio File MPEG/DivX® MPEG/DivX® JPEG JPEG [REP] Repeats the present file or data. Selects a folder. [FREP] Repeats the music or data of the [List] Displays the folder list or play list. (page present folder. DNX7240BT/DDX6054... -
Page 23: List Select
⁄ [RDM] Starts or stops Random Play (to play files of the present folder in random order). • Touching [List] displays the previously used Folder [4Line]/ [2Line] Switches the number of lines list or Play list. displayed in the Information Display. Select a song [FOLD]/ [Flist] Displays the folder list. -
Page 24: Usb Device Select
Scrolls to the selected initial. Select a USB device 1 Selects a device or partition. [ UP] Returns to the Device Selection screen. ] When is appeared, the text display is scrolled by touching it. [CTRL] Returns to the Source Control screen. DNX7240BT/DDX6054... -
Page 25: Link Search (Audio File In Usb)
Link search (Audio File in USB) Playback Screen (Video file, Picture file) Searches for another song of the currently Basic functions are available even when the selected artist. playback screen is displayed. Display the Source Control Screen Display the Playback Screen See <Source Control Screen>... -
Page 26: Easy Control Screen (Video File, Picture File)
1, 2 Switches to the Playback Screen. 3 Displays the Source Control Screen. [4], [¢] Searches for a file. Disc Disc Stops playing. [38] Plays or pauses. ] Reverses the picture horizontally. ] Rotates counter clockwise. ] Rotates clockwise. [Exit] Ends Picture Control. DNX7240BT/DDX6054... -
Page 27: Movie Menu Control
Movie Menu Control Selects an option from the Movie Menu. Display the playback screen See <Operation on the Playback Screen of Visual Sources> (page 16). Display the Menu Control screen Operation on the Menu Control screen [SUB] Switches the subtitle language. [Audio] Switches the voice language. -
Page 28: Ipod Control
When you connect an iPod to this unit, playback starts from the song you were playing on the iPod itself (Resume Function). • If the played song is not a video content, "No Video Signal" is displayed on the video screen. DNX7240BT/DDX6054... -
Page 29: Source Control Screen
[ARDM] Starts or stops Album Random Play Source Control Screen (plays randomly from current album).* Switches to the source control screen to use [INFO] Displays information screen of music/ various playback functions. video being played. Display the Source Control Screen [LINK] MUSIC MUSIC... -
Page 30: Link Search (Music File)
TOP] Moves to the top category. CUR] Displays the currently playing category. [CTRL] Returns to the Source Control screen. Scrolls to the position of the specified initial Scrolls to the selected initial. DNX7240BT/DDX6054... -
Page 31: Radio Listening
Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch> (page 81). Source Control Screen Multi Function Switches to the source control screen to use various functions. -
Page 32: Preset Select
[CTRL] Returns to the Source Control screen. Start Auto Memory Auto Memory terminates when 6 stations are stored or when all stations are tuned in. ⁄ • The operation ends automatically if you do not operate within 10 seconds. DNX7240BT/DDX6054... -
Page 33: Manual Memory
Manual Memory Radio Text Stores the current receiving station in memory. You can display the radio text. (Only when receiving the FM broadcast) Display the Source Control Screen Select a station See <Source Control Screen> (page 31). See <Source Control Screen> (page 31). Select a station you wish to store in memory Display the radio text... -
Page 34: Traffic Information
• It is necessary to have Traffic Information function set to On in order to have the Traffic Information screen appear Type automatically. • During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it's automatically the remembered volume. DNX7240BT/DDX6054... -
Page 35: Tv Watching
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Easy Control Screen Function During TV Screen Displays the basic operation buttons on the Basic functions are available even when the TV screen. -
Page 36: Source Control Screen
Operation on the Menu Control screen [Menu] Shows Digital TV Broadcasting menu [1/2] Switches the multi function display. screen. ] Closes the multi function bar. [EPG] Shows EPG (Electric Program Guide) [AME] Selects the Auto Memory mode. screen. See <Auto Memory> (page 37). DNX7240BT/DDX6054... -
Page 37: Auto Memory
[2], [3], [5], [∞] Moves highlight in Digital TV Manual Memory Broadcasting menu. Stores the current receiving channel in memory. [Enter] Executes selected menu item. Display the Source Control Screen [Return] Returns to the previous screen. [Exit] Returns to Digital TV screen. See <Source Control Screen>... -
Page 38: Preset Select
Enter the name See <Character Entry> (page 40) for information on how to enter a name. End Name set 1 Memorized stations are displayed. Touch to tune in. ] Switches to the TV screen. [CTRL] Returns to the Source Control screen. DNX7240BT/DDX6054... -
Page 39: Bluetooth Audio Control
Bluetooth Audio Control DNX7240BT: You can listen to audio files stored in Bluetooth audio player and cell-phone. DDX6054: When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in Bluetooth audio player and cell-phone. • You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well. -
Page 40: Other Functions
• You must connect a commercially available relay unit in order to use this function. Connect the external device to be controlled to that relay unit. • Refer to <EXT SW Setup> (page 65) for information on setting the power on or off specification. DNX7240BT/DDX6054... -
Page 41: Muting Audio Volume Upon Reception Of Phone Call
Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄... -
Page 42: Screen Control
Displayed on Video, iPod, USB or Rear View Camera screen only. [Dimmer] Dimmer Mode Setup "ON": The display dims. "OFF": The display doesn’t dim. "SYNC": Turning the Dimmer function On or Off when the vehicle light control switch is turned On or Off. DNX7240BT/DDX6054... -
Page 43: Hands Free Unit Control
Hands Free Unit Control DNX7240BT: Various functions can be used in the Hands Free control mode. DDX6054: Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unit connected only) • You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well. -
Page 44: During A Call
Calls screen. See <Making a Call Using Call terminating the current call Records> (page 46). [Direct Number] Displays the Dialing Display screen. See <Calling by Entering a Phone Number> (page 46). [Voice] Starts voice recognition. See <Calling by Voice Recognition> (page 46). DNX7240BT/DDX6054... -
Page 45: Calling By Phonebook
[BT SETUP] Displays the Bluetooth SETUP Select the phone number to call screen. (page 69) [TEL SETUP] Displays the Hands Free Setup screen. (page 48) ⁄ • While your car is moving, some functions are disabled for safety’s sake. The buttons associated with the disabled functions become ineffective if pressed. -
Page 46: Calling By Entering A Phone Number
Display the Voice Recognition screen Display the Hands-Free Control screen See <Making a call> (page 44). Display the Outgoing Calls, Incoming Calls, Utter the voice registered in the or Missed Calls screen Phonebook DNX7240BT/DDX6054... -
Page 47: Controlling Tone-Based Services
Controlling Tone-based Services When a beep is heard, utter the name within 2 seconds. Uses tone base service using DTMF (Dual Tone Multi Frequency). When a beep is heard, utter the category within Display the Talking screen 2 seconds. See <Calling by Entering a Phone Number> (page 46). -
Page 48: Setting Up The Hands-Free Phone
"Front L": Outputs the tone from the front left- hand side speaker. "Front R": Outputs the tone from the front right-hand side speaker. "Front All": Outputs the tone from the both front speakers. DNX7240BT/DDX6054... -
Page 49: Voice Registration
Voice Registration End voice registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. Display the Phonebook Detail screen Go through the procedure of <Calling by Phonebook> (page 45). ⁄ Select the name to register •... -
Page 50: Phone Number Preset
Repeat from 1st try if the voice is different from the 1st try. phone number. [Delete] Deletes the currently displayed phone number. Touch to display the confirmation screen. Touch [Yes] to delete or [No] to cancel. Search phone number to register with each function DNX7240BT/DDX6054... -
Page 51: Sms (Short Message Service)
Register phone number Select a message to display 1 Calls the number in the selected message. [DISP] Displays the selected message. SMS (Short Message Service) SMS Message screen Uses SMS function. Display the Hands-Free Control screen See <Making a call> (page 44). Display the SMS Select screen Creates a new message for the selected message. - Page 52 QWE : Qwerty key layout. [Clear] Erases the entered character. If touched more than 1 second, all the input characters are erased. [Space] Enters a space. [SET] Determines the message and returns to the SMS Create Menu screen. Send the message. DNX7240BT/DDX6054...
-
Page 53: Audio Control
[Subwoofer Level] Adjusts the subwoofer volume. [Loudness] Turns the Loudness control Item Page function On or Off. (DDX6054 only) [Audio Control] If turned "ON", high and low tones are [Equalizer] automatically enhanced during low volume. [Tone] Settable only when zone function is set to Off. -
Page 54: Equalizer Control
Audio Control [Bass Boost] Sets the amount of bass boost. [SystemQ-Ex] Selects items to be adjusted for (DNX7240BT only) tone curve setup. (DDX6054 only) "OFF"/ "Step1"/ "Step2" If turned "OFF", only Level can be setup for [Stream Information] Displays the present tone curves. -
Page 55: Tone Setup (Ddx6054)
Tone Setup (DDX6054) Zone Control You can set a Tone curve. You can set the front and rear audio source. Display the Equalizer screen Display the Zone Control screen > > > > Touch [ [Equalizer]. (page 53) Touch [ [Zone Control]. -
Page 56: Space Enhancer (Dnx7240Bt)
"All". • Only the adjusted distance of position setup (Position and Position Fine Control values) is stored in memory. Therefore, the final adjustment distance changes if you change the Car Type Set Up value (page 75). DNX7240BT/DDX6054... - Page 57 Position DTA Control You can fine-adjust your listening position. Display the Position DTA screen Select a speaker you wish to adjust Left front speaker Right front speaker Left rear speaker Right rear speaker Subwoofer [2], [3] Finely adjusts the value set with the Position function.
-
Page 58: Setup Menu
[AV Interface] [5], [∞] Scrolls the setup menu. ⁄ • [AV-IN SETUP], [Navigation] and [Audio SETUP] options can be locked. The key mark ( ) is displayed in reverse video for the locked option. See <Setup Memory> (page 66). DNX7240BT/DDX6054... -
Page 59: Vehicle Maintenance (Dnx7240Bt)
[Reset] Resets the distance the vehicle has run. Mileage Tracker (DNX7240BT) [Input] Sets a distance. Measures the travel distance. Set a distance Display the Mileage Tracker screen > > > Touch [ [Information] > [Vehicle] [Mileage Tracker]. (page 58) Measure the travel distance 1 Input a distance. -
Page 60: Gas Mileage Analysis (Dnx7240Bt)
1 Input information. [Clear] Erases the entered digit. If touched more than 1 second, all the input digits are erased. [CALC] Determines the input information and returns to the previous screen. [Cancel] Cancels the input information. DNX7240BT/DDX6054... -
Page 61: Divx Setup
DivX Setup Software Information Checks the registration code. This code is needed Checks the software version of this unit. when making a disc which has DRM (Digital Display the Software Information screen Rights Management). > > > Touch [ [Information] Display the DivX Setup screen [Software]. -
Page 62: User Interface
[AUD] button. (page 10) "American English") "V.OFF" : Press the [AUD] button for more than 1 second to turn the display off. "R-CAM" : Press the [AUD] button for more than 1 second to switch to rear view. DNX7240BT/DDX6054... -
Page 63: Touch Panel Adjustment
Touch Panel Adjustment Clock Setup You can adjust the touch panel operations. You can adjust the clock time. Display the Touch panel Adjustment screen Display the Clock Setup screen > > > > > > Touch [ [System] [Touch]. Touch [ [System] [Clock]. -
Page 64: Security Setup
Start Security Code setup you have entered in Step 4. Register your security code ⁄ • If you have already completed the code registration, Now, you can use your Receiver. [CLR] is displayed. Enter a security Code Input four-digit number. DNX7240BT/DDX6054... -
Page 65: Monitor Angle Control
Monitor Angle Control EXT SW Setup You can adjust the position of the monitor. Setting up power specification of the external device for which the power is controlled from this Display the Angle Setup screen unit. (DNX7240BT only) > > >... -
Page 66: Setup Memory
[No] To cancel the function, touch [No]. To cancel memorization, touch [No]. The SETUP Menu screen appears again. Select a desired function [Recall] Recalls the memorized settings. [Memory] Memorizes the current Audio Setup and AV Interface settings. [Clear] Clears the currently memorized settings. DNX7240BT/DDX6054... -
Page 67: Entering Background
Entering Background Load the image Loads a image for background. Connect the device which has the image to load Display the Background screen > > > Touch [ [Display] [Background]. (page 58) 1 Rotates the image. ⁄ Display the Background Memory screen •... -
Page 68: Panel Color Coordinate
Select a Preset number to register 2 sec. 1 Sets to the touched color. Adjusted color is registered to the selected [Adjust] Sets and registers favorite color to the Preset button. preset buttons ([P1] – [P3]). Complete the color coordination DNX7240BT/DDX6054... -
Page 69: Screen Control
Screen Control Registering Bluetooth Unit You can adjust the screen mode of the monitor. Registers the Bluetooth unit to be connected. Display the Screen Control screen Display the Bluetooth Setup screen > > > > > Touch [ [Display] [Screen Touch [ [Bluetooth SETUP]. - Page 70 PIN code necessary for registration, see <Registering Bluetooth Unit PIN Code> (page 71). Go through the procedure of <Registering • If the error message appears even though the PIN code is Bluetooth Unit> and complete the correct, try <Registering Special Bluetooth Unit>. registration (pairing). DNX7240BT/DDX6054...
-
Page 71: Registering Bluetooth Unit Pin Code
Registering Bluetooth Unit PIN Code Bluetooth Unit Connection Sets the PIN code of the Bluetooth unit to enter Selects the Bluetooth unit to connect. when registering (pairing) from the cell-phone or Display the Bluetooth Setup screen audio player side. > >... -
Page 72: [Av-In Setup]
[iPod AV Interface Use] Sets the terminal "OFF") which iPod is connected. ( "iPod") 1 Sets a name to be displayed when you select a system that is connected via the AV INPUT port. ( "VIDEO") DNX7240BT/DDX6054... -
Page 73: Dsp Bypass Control (Dnx7240Bt)
[Navigation Input] Selects a navigation system connection. ( "RGB") (DDX models only) "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT1 port. "OFF": Must be used if no navigation system is connected. -
Page 74: Speaker Setup
Subwoofer [Subwoofer] Sets the availability of 1 Sets the High Pass Filter of the front speaker. subwoofers. (DDX6054 only) 2 Sets the High Pass Filter of the rear speaker. [Tweeter] You can set the tweeter when you 3 Sets the Low Pass Filter of the sub woofer. -
Page 75: Car Type (Dta) Setup (Dnx7240Bt)
Sets the sub woofer phase. (DNX7240BT: Only when "Subwoofer" is set to "ON" in Audio Setup) (DDX6054: Only when "Subwoofer" is set to Set the speaker locations "ON" in Audio Setup and "LPF FREQ" is set to other than "Through") [HPF FREQ] High Pass Filter adjustment. -
Page 76: Dvd Setup
"Wide" and "Normal", allowing you to listen to the movie's dialog more clearly. This is effective only when you are using a Dolby Digital software. The operation is available during the play stop mode. [Angle Mark] Sets an angle mark display. "ON") DNX7240BT/DDX6054... -
Page 77: Dvd Language Setup
[Original] Sets the DVD's original language [Screen Ratio] Selects the screen display (only when setting an audio language). mode.* "16:9") [Clear] Clears the language code. "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Set the language you use Box format (having black stripes at the top and bottom of screen). -
Page 78: Disc Setup
"2" position. even when you have set the parental lock. Disc Setup Performs setup when using disc media. Display the DVD Setup screen > > Touch [ [DVD SETUP]. (page 58) Display the Disc Setup screen Set each item DNX7240BT/DDX6054... -
Page 79: Ipod Setup
USB Setup iPod Setup Performs setup when using USB. Performs setup when using iPod. Display the USB Setup screen Display the iPod Setup screen > > > > Touch [ [USB SETUP]. (page 58) Touch [ [iPod SETUP]. (page 58) Set each item Set each item [Picture Display Time] Selects a picture... -
Page 80: [Tuner Setup]
[Auto TP Seek] When traffic information station reception is poor, automatically searches for a station that can be received better. ( "ON") [Language Select] Selects a display language Sets the present TV1 or TV2 receiving area. for the PTY function. DNX7240BT/DDX6054... -
Page 81: Remote Controller
Remote Controller This unit can be operated using the Remote Controller supplied with this unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. •... -
Page 82: Common Operations (Aud Mode)
V.SEL VIEW MAP DIR AUDIO SUBTITLE ANGLE ZOOM ANGLE Switches to the navigation screen. FM + DISP DISP V.SEL V.SEL ZOOM MODE FNC/PBC MENU POSITION TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM • • ENTER • DNX7240BT/DDX6054... -
Page 83: Dvd/Vcd (Dvd Mode)
VCD 1.X, VCD 2.X (PBC OFF) DVD/VCD (DVD mode) Track number [RC-DV330] [RC-DV340] Cancel Track search and file search Selects the track or file to be played. VCD 2.X (PBC ON) VIEW MAP DIR ANGLE Scene number FM + − OPEN ZOOM Number... -
Page 84: Music Disc/Audio File/Video File/ Picture File (Aud Mode)
ZOOM AM− 2 ZONE 2 ZONE Play/Pause Pauses the track. Press again to resume playing. TOP MENU MENU DVD SETUP RETURN DISP V.SEL AUDIO SUBTITLE ANGLE ZOOM ZOOM MENU POSITION • AUD• • DVD• ENTER ENTER • T V• DNX7240BT/DDX6054... -
Page 85: Radio (Aud Mode)
Radio (AUD mode) NAVI (NAVI mode) [RC-DV330] [RC-DV340] [RC-DV330] [—] Band switching Joystick Switches to bands received by the unit. Scrolls the map, or moves the cursor. ZOOM MENU POSITION ANGLE FM + • − OPEN • ENTER ZOOM • •... -
Page 86: Tv (Tv Mode)
CANCEL • The number of the memorized station is AV OUT OPEN SUBTITLE VIEW MAP DIR selected. ( – ANGLE FM + ZOOM • Press the direct tuning key first, then specify the channel of the station to receive. DNX7240BT/DDX6054... -
Page 87: Initial Setup
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup End initial setup Turns the power On ⁄ Set each item • The settings above can be changed in <Setup Menu>... -
Page 88: Status Bar Indicator Items
Indicates that the PBC function is ON. "SVCD" Identifies the Super Video CD. "VER1" Indicates that the Video CD version is 1. "VER2" Indicates that the Video CD version is 2. "REP" Indicates that the Repeat function is ON. DNX7240BT/DDX6054... -
Page 89: Dvd Language Codes
DVD Language Codes Code Language Code Language Code Language Afar Icelandic Singhalese Abkhazian Italian Slovak Afrikaans Japanese Slovenian Amharic Javanese Samoan Arabic Georgian Shona Assamese Kazakh Somali Aymara Greenlandic Albanian Azerbaijani Cambodian Serbian Bashkir Kannada Siswati Byelorussian Korean Sesotho Bulgarian Kashmiri Sundanese Bihari... -
Page 90: Help? Troubleshooting
✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on <Handling discs> (page 6). ✔ The recording condition is bad. ☞ Record the media again or use another media. DNX7240BT/DDX6054... -
Page 91: Help? Error
The disc player is malfunctioning. ➡ Eject the disc and try inserting it again. Contact Remove the USB device. the Kenwood dealer if this indicator continues "Authorization Error" : blinking or the disc cannot be ejected. Connection to the iPod has failed. -
Page 92: Specifications
: 0.008 % (1 kHz) S/N Ratio (dB) : 98 dB (DVD-Video 96 kHz) Dynamic Range : 98 dB (DVD-Video 96 kHz) Disc Format : DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit Number : 16/ 20/ 24 bit DNX7240BT/DDX6054... - Page 93 Usable Sensitivity (S/N : 26 dB) Full Bandwidth Power (Front & Rear) DNX7240BT: 0.8 μV/ 75 Ω (PWR DIN 45324, +B=14.4V) DDX6054: 0.7 μV/ 75 Ω : 30 W x 4 Quieting Sensitivity (S/N : 46 dB) Preout Level (V) : 1.6 μV/ 75 Ω...
- Page 94 : -20 °C – +85 °C Weight DNX7240BT : 2.5 kg DDX6054 : 2.45 kg Specifications subject to change without notice. Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly.
-
Page 95: About Divx
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. - Page 96 1999/5/CE qui Slovensko lui sont applicables. S tem Kenwood izjavlja, da je ta DNX7240BT v skladu z osnovnimi zahtevami Deutsch in ostalimi ustreznimi predpisi Direktive 1999/5/EC. Hiermit erklärt Kenwood, dass sich dieser DNX7240BT in Übereinstimmung mit...