Radio; Radio Basic Operation; Set The Remote Controller Mode Switch To Aud; Mode Before Starting Operation, See Switch The - Kenwood DNX775RVS Instruction Manual

Radio

Radio

Radio Basic Operation

Most functions can be controlled from the
source control screen.
To enter Radio source, touch [Radio] icon in
the source selection screen. (P.13)
NOTE

• Set the remote controller mode switch to AUD

mode before starting operation, see Switch the

operation mode (P.81).

Control screen

1
2
5
3
Preset list screen
6
Information display
1
Displays the information of the current station:
Frequency and Channel
Touching [ ] allows you to switch between
Content A and Content B.
Content A: PS name, Radio Text, Title & Artist
Content B: PTY Genre, Radio Text plus
Preset#: Preset number
40
Seek mode
2
Switches the seek mode in the following
sequence; [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in stations in memory one
after another.
• [MANUAL]: Switches to the next frequency
manually.
Operation keys
3
• [E] [F] : Tunes in a station. The method of
frequency switching can be changed (see 2
in table).
• [ ] : Displays the Graphic Equalizer screen.
(P.76)
Preset list
4
4
• Recalls the memorized station or channel.
• When touched for 2 seconds, stores the
current receiving station or channel in
memory.

• Touch on the right side of the screen to display

the Preset list. Touch again to close the list.
Function panel
5
Touch on the left side of the screen to display
the function panel. Touch again to close the
4
panel. For details on the keys, see Function
panel (P.41).
Band button
6
7
Switches the band (FM, AM).

Indicator Items

7
• [ST]: A stereo broadcast is being received.
• [MONO]: The forced monaural function is on.
• [TI]: Indicates the reception state of traffic
information.
White: TP is being received.
Orange: TP is not being received.