HP R1500 - UPS XR User Manual page 38

LCD Configuration and Status
The Parallel Mode menu options allow you to configure the UPS mode of operation, as
described in Table 3-11.
Table 3-11: Parallel Mode Choices
LCD Display
Parallel Mode
For Capacity
Parallel Mode
N+1 Redundancy
Setting the Language
Select Set Language from the System Setup menu to select from seven different languages
for the menu display. The available choices are English, Francais, Deutsch, Espanol,
Japanese, Nederlands, and Italiano. The asterisk (*) indicates the current configuration.
Setting the Password
Select Set Password from the System Setup menu to set the password.
To access some of the more critical UPS operations, you must have a password. Use the
Center and Enter buttons to select the six digits for the password [0-9 and A-Z].
NOTE: The password must be six characters long. The default password is
1. Select the first digit using the up and down arrow keys on the Center button.
2. Press the right arrow key on the Center button to move to the next digit.
3. To change a digit, use the left arrow key on the Center button to go back.
4. After entering the entire password, press the Enter button.
IMPORTANT: Record your password. After 30 minutes with no key presses, security is
automatically restored and the display changes to the main status display.
3-14
Explanation
Select this option to configure the UPS for capacity operation.
Select this option to configure the UPS for redundant operation.
System Setup
Set Language
System Setup
Set Password
Enter Password
COMPAQ
HP Uninterruptible Power System R12000 XR Models User Guide
COMPAQ .