Removing The Usb Board - Toshiba TECRA M10 Maintenance Manual

4.17 MDC modem/USB board
4. Disconnect the USB harness from the connector CN9560 on the system board and
connector CN9660 on the USB board.
5. Remove the USB board from the slot of the base assembly while pushing the latches
in the direction as shown in the figure below.
CN9660
TECRA M10 Maintenance Manual (960-685)
CN9560
Figure 4-32 Removing the USB board
4 Replacement Procedures
USB harness
USB board
Latch
[CONFIDENTIAL] 4-51