Removing The Robson Card - Toshiba TECRA M10 Maintenance Manual

Hide thumbs Also See for TECRA M10:

Table of Contents

4.14 Robson card

Removing the Robson card

To remove the Robson card, follow the steps below and refer to Figure 4-24.

1. Remove the following screws securing the Robson card.

M2.0×4B BIND screw

2. Disconnect the Robson card from the connector on the system board.

TECRA M10 Maintenance Manual (960-685)

M2.0x4B BIND

Figure 4-24 Removing the Robson card

4 Replacement Procedures

[CONFIDENTIAL]

Show Quick Links

Table of Contents