Fin Cover; Removing The Fin Cover; Installing The Fin Cover - Toshiba TECRA M10 Maintenance Manual

Hide thumbs Also See for TECRA M10:

Table of Contents

4.6 Fin cover

NOTE: When repairing the PC, clean the cooling fin with a vacuum cleaner.

Do not use cotton sticks and tweezers to remove dusts. It may cause the cooling

module problem or dusts stuffed.

To remove the Fin cover, follow the steps below and refer to Figure 4-9.

1. Push down the hook and remove the fin cover while sliding it in the direction in the

figure below.

To install the Fin cover, follow the steps below and refer to Figure 4-9.

1. Set the fin cover into the slot and slide it to engage the hook.

TECRA M10 Maintenance Manual (960-685)

Figure 4-9 Removing the fin cover

4 Replacement Procedures

[CONFIDENTIAL]

Show Quick Links

Table of Contents