Toshiba TECRA M10 Maintenance Manual page 311

4.27 Touch pad/Fingerprint sensor board
3. Disconnect the touch pad FFC, touch pad button FFC and dual button FFC from
the connector CN9650 and CN3240 on the fingerprint sensor board and connector on
the touch pad.
NOTE: In models without a dual button, there is no dual button FFC.
4. Remove the unit dual pad (with the fingerprint sensor board).
Unit dual pad
(with the fingerprint sensor board)
Dual button FFC
Connector
Figure 4-50 Removing the touch pad/fingerprint sensor board (2)
TECRA M10 Maintenance Manual (960-685)
Touch pad FFC
4 Replacement Procedures
Touch pad
button FFC
CN9650
CN3240
[CONFIDENTIAL] 4-79