Bluetooth Module; Removing The Bluetooth Module; Installing The Bluetooth Module - Toshiba TECRA M10 Maintenance Manual

4.28 Bluetooth module

4.28 Bluetooth module

Removing the Bluetooth module

To remove the Bluetooth module, follow the steps below and refer to Figure 4-53.
1. Lift up the hook and slide the Bluetooth holder in the direction in the figure below
to remove it from the guides.
2. Remove the Bluetooth module from the guides.
Bluetooth module
Bluetooth harness

Installing the Bluetooth module

To install the Bluetooth module, follow the steps below and refer to Figure 4-53.
1. Set the Bluetooth module along the guides and arrange the Bluetooth harness under
the guides.
2. Set the Bluetooth holder under the guides and slide it until the hook is engaged.
TECRA M10 Maintenance Manual (960-685)
Bluetooth holder
Guide
Guide
Figure4-53 Removing the Bluetooth module
4 Replacement Procedures
Hook
Guide
[CONFIDENTIAL] 4-83