6.
Remove the chassis from the box and place it on a flat surface.
7.
Open any additional boxes and remove the items inside. Verify the contents, which depend
on the configuration of your cluster.
4.2.2 Unpacking the ISR 9096
Use the following procedure to unpack the ISR 9096 container:
1.
Remove the top cover of the box.
2.
Verify that the top compartment (see
1.
Cabling Guide brackets (these brackets are not used for HP Cluster platform
installations).
2.
Small cardboard box for accessories.
3.
Packing foam.
4.
Packing list.
5.
Documentation.
Figure 4-4 Top Compartment in the ISR 9096 Box
1
2
Item
1
2
3
4
3.
Remove the accessories box
items:
•
A CD with documentation and software utilities
•
Console cable.
•
Ground stud kit.
•
Tray screws kit for the rail.
•
Power cable.
Figure
4-4) contains the following components:
Description
Accessories box
Packing list
Cabling brackets
Getting Started Short Guide
(Figure
4-5) from the crate and verify that it contains the following
3
3
4
4
4.2 Unpacking the Chassis
55