Configuring The Advertisable Tlvs; Configuring The Management Address And Its Encoding Format - HP 6125G Configuration Manual

Step
2. Enter Layer 2 Ethernet
interface view.
3. Enable LLDP polling and
set the polling interval.

Configuring the advertisable TLVs

To configure the advertisable LLDPDU TLVs on the specified port or ports:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view.
3. Configure the
advertisable TLVs.

Configuring the management address and its encoding format

LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encoded its
management address in character string format, you must configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
To configure a management address to be advertised and its encoding format on a port:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view:.
Command
interface interface-type interface-number
lldp check-change-interval interval
Command
system-view
interface interface-type interface-number
lldp tlv-enable { basic-tlv { all | port-description
| system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name
[ vlan-id ] } | dot3-tlv { all | link-aggregation |
mac-physic | max-frame-size | power } |
med-tlv { all | capability | inventory |
location-id { civic-address device-type
country-code { ca-type ca-value }&<1–10> |
elin-address tel-number } | network-policy |
power-over-ethernet } }
Command
system-view
interface interface-type
interface-number
201
Remarks
N/A
Disabled by default.
Remarks
N/A
N/A
Optional.
By default, all types of LLDP
TLVs except location
identification TLVs are
advertisable on a Layer 2
Ethernet port.
Remarks
N/A
N/A