Comprehensive Selective Qinq Configuration Example - HP 6125G Configuration Manual

Layer 2 - lan switching
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

[PE2] traffic classifier A20
[PE2-classifier-A20] if-match customer-vlan-id 20
[PE2-classifier-A20] quit
[PE2] traffic behavior P200
[PE2-behavior-P200] nest top-most vlan-id 200
[PE2-behavior-P200] quit
# Create a QoS policy named qinq, associate traffic class A10 with traffic behavior P100, and
associate traffic class A20 with traffic behavior P200.
[PE2] qos policy qinq
[PE2-qospolicy-qinq] classifier A10 behavior P100
[PE2-qospolicy-qinq] classifier A20 behavior P200
[PE2-qospolicy-qinq] quit
# Enable basic QinQ on the port.
[PE2] interface gigabitethernet 1/0/1
[PE2-GigabitEthernet1/0/1] qinq enable
# Apply QoS policy qinq to the incoming traffic on the port.
[PE2-GigabitEthernet1/0/1] qos apply policy qinq inbound
Configure GigabitEthernet 1/0/2:
# Configure GigabitEthernet 1/0/2 as a trunk port and assign it to VLAN 100 and VLAN 200.
[PE2] interface gigabitethernet 1/0/2
[PE2-GigabitEthernet1/0/2] port link-type trunk
[PE2-GigabitEthernet1/0/2] port trunk permit vlan 100 200
# Set the TPID in the outer VLAN tags to 0x8200.
[PE2-GigabitEthernet1/0/2] qinq ethernet-type service-tag 8200
[PE2-GigabitEthernet1/0/2] quit
On the third-party devices between PE 1 and PE 2, configure the port that connects to PE 1 and that
3.
connecting to PE 2 to allow tagged frames of VLAN 100 and VLAN 200 to pass through.

Comprehensive selective QinQ configuration example

Network requirements
As shown in
Company A uses CVLAN 10 and CVLAN 20 to transmit voice traffic and data traffic separately,
and Company B uses CVLAN 30 and CVLAN 40 to transmit voice traffic and data traffic separately.
The services of the two companies are integrated together.
PE 1 and PE 2 are edge devices on the service provider network and are connected through
third-party devices with a TPID value of 0x8200.
Configure the edge and third-party devices to allow the voice traffic and data traffic to be
transmitted between the two companies via SVLAN 100 SVLAN 200 separately.
Figure
55:
169

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents