Function
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
•
Closed
Caption
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Standby
Audio Pass Through
Settings
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
for how to make the connection.
Returns all settings to the factory preset values.
Reset All
Settings
Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Enabling this function slightly increases the standby power consumption.
The following settings will still remain: Keystone, User 1, User 2, Position,
Phase, H. Size, Reference Mode, Reset Picture Setting, Projector
Installation, Language, Reset All Settings and Current System
Status.
Description
"Connection" on page 15
"Connection" on page 15
for how
/
to
Operation
43