BenQ MS504 User Manual page 40

Function
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color
Color
Temperature
Color
Temperature
Fine Tuning
3D Color
Management
Reset Picture
Setting
Quick Auto
Search
40 Operation
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 26
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
for details.
Adjusts the brightness of the image. See
page 27 for details.
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 27
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 27
This function is only available when a Video, S-Video or Component Video
signal is selected.
Adjusts the red and green color tones of the image. See
Tint" on page 27 for details.
This function is only available when a Video or S-Video signal is selected and
the system format is NTSC.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 27
This function is only available when a Video, S-Video or Component Video
signal is selected.
See "Adjusting Brilliant Color" on page 27
See "Selecting a Color Temperature" on page 27
See "Setting a preferred color temperature" on page 28
See "3D Color Management" on page 28
See "Resetting current or all picture modes" on page 29
See "Switching input signal" on page 23
Description
for details.
"Setting the User 1/User 2 mode" on page 26
"Adjusting Brightness" on
for details.
for details.
for details.
for details.
for details.
"Selecting a
for details.
"Adjusting
"Adjusting
for details.
for details.
for details.