Remote Paging Operations; Freezing The Image - BenQ MS504 User Manual

4. Press
5. Press
direction by pressing
Selection
Count Up
Count Down
6. Press
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
press MODE/ENTER.
8. A confirmation message appears. Highlight Yes and press MODE/ENTER on the
projector or remote control to confirm. You will see the message "Timer is On"
displaying on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight
Off. Press MODE/ENTER. A confirmation message appears.
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message
"Timer is Off" displaying on the screen.

Remote paging operations

Connect the projector to your PC or notebook with a USB cable prior to using the paging
function. See
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing Page Up/Page Down
on the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft
higher operating systems are recommended.

Freezing the image

Press Freeze on the remote control to freeze the image. The word "FREEZE" will
display in the upper left corner of the screen. To release the function, press any key on the
projector or remote control.
If your remote control has the following keys, please note that they cannot be pressed to release the function:
LASER, #1, #4, Page Up/Page Down, NETWORK, NETWORK SETTING.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen onscreen.
30 Operation
to highlight Timer Position and set the timer position by pressing
Top-Left Bottom-Left
to highlight Timer Counting Direction and select your desired counting
/
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
to highlight Sound Reminder and decide if you want to activate sound
/
"Connection" on page 15
Top-Right
.
. If you select On, a double beep sound will be heard at
and press
for details.
®
Windows
Bottom-Right
/ to highlight On and
®
98 operating system. Windows
/
.
®
XP or