Sending Sms Messages; Sending Sms; Sms; Sms Requirements - Philips Magic 5 User Manual

8 SMS

Not supported everywhere
(Function is not supported in all countries and
networks)
Help 8 · SMS
Press i and 8 to print the instructions for SMS
functions.

SMS Requirements

CLIP for SMS
Your device is preset for using the SMS (Short Messaging
Service) services. Caller identification (CLIP) must be ac-
tivated for the SMS to work. It is possible that you will not
be able to send and receive SMS messages from a private
branch exchange (depending on the country and network).
SMS with secret number
Should you face problems in sending SMS, the rea-
son for the same could be that you are using a secret
number or that the device is connected to an old
ISDN System.
SMS Requirements
Ask your telephone service provider ...
... whether you must register for the SMS Service.
... to which mobile telephone service providers you
can send SMS
... which costs are applicable.
... which functions are available.

Sending SMS

On the device
Sending an SMS on the Machine
1 Press W.
You can also load the function by pressing _,
61 and _.
2 You can enter characters using the numeric keys (see
button labels) Press 0 to enter space or special charac-
ters. You can move the cursor using /. Use V to de-
lete individual characters. Press and hold V (at least two
seconds) to delete the entire text.
You can enter 160 characters. Press j to print the
SMS before sending it.
The last five SMS messages written remain saved
as templates. Press L until the desired message
appears.
3 Confirm using _.
4 Enter the desired telephone number with the number
pad or select a saved entry.
You can send an SMS message to up to five recip-
ients. Press _ after entering the entry.
5 Press W. The message is sent.
On the cordless telephone

Sending SMS

Navigating, deleting and back
You can navigate within the text using /. Use V to
delete individual characters. Press ' to close the
menu and return to the starting mode.
28
1 Press W.
You can also call the function by pressing / and
selecting using / SMS . Confirm using _.
2 Using / select SEND SMS .
3 Confirm with _.
4 Enter the text. You can enter characters using the nu-
meric keys (see button labels) Enter special characters
using 0 or #. Press and hold the respective key or
press it several times until the desired character appears
on the display. You can enter 160 characters.
Switch the keyboard to enter capital or small letters:
Press ô Select . Using / select whether you
would like to enter capital or small letters. Confirm
using _. Press hand hold * (at least two sec-
onds) to toggle between capital and small letters.
Press ô Select . Using / select INSERT
CHAR. to enter a character. Confirm using _.
Press ô Select . Using / select CANCEL to
delete the entire text. Confirm using _. Con-
firm the deletion with ô Yes .
5 Confirm with _.
6 Enter the desired number using the numeric keypad or
dial a saved entry.
7 Confirm with _.
8 Press ô Confirm to send the message. Press õ
EDIT ENTRY to edit the message again.
After sending you can save the SMS. Press ô
Yes to save the message. Press õ No to delete the
message.
Sending SMS from the telephone book
You can select an entry from the telephone book and then
call the SMS menu.
1 Short press m to call up the telephone book of the de-
vice. Long press m (at least two seconds) to call up the
telephone book of the cordless telephone.
2 Select the desired entry using /.
3 Press ô Option .
4 Using / select SEND SMS .
5 Confirm with _. The Send SMS menu appears.
SMS to E-Mail
You can send an SMS to an E-Mail address.
1 Press W.
You can also call the function by pressing / and
selecting using / SMS . Confirm using _.
2 Dial using / EDIT EMAIL .
3 Confirm using _.
4 Enter the text as described under Sending SMS.
5 Confirm using _.
6 Enter the e-mail address. Press and hold 0 until the @
character appears.
E-Mail addresses must not contain a space.