Poor Output Quality When Copying Or Sending Fax Messages; Poor Output Quality Of Received Fax Messages - Philips Fax Machine User Manual

Poor output quality when copying or sending fax messages

Clean the scanner glass, scanner roller, document feed roller and facing rubber lips
Open the operation panel by raising it at the recess in the
middle. If you hear a slight click, the panel is latched into
place.
Hold down the FINE/PHOTO key on the operation panel: the
scanner roller (C) will begin to turn. You can then clean the scanner
FINE/PHOTO
roller evenly by lightly rubbing the cloth over it.

Poor output quality of received fax messages

Clean printer roller
1
If the paper feed mechanism contains paper please remove
it.
1. Open the operation panel as described above.
2. Then open the ink film cover by pressing both blue
release levers back at the same time with both hands and
then folding back the ink film cover.
Do not use the fax cleaners available on the market which are drawn through the
machine automatically. By doing so you can damage your fax machine!
2
1
– 37 –
A
B
C
D
Lightly wipe the scanner glass (B) and rubber lip (D) with a
cloth. Carefully turn the document feed roller (A) by hand
and wipe it gently with the cloth.
E
Using a cloth as described above, wipe the grey printer
roller (E). To clean the entire roller turn the roller by hand.
When cleaning is complete, close the ink film cover and
the operation panel.