Advertisement
Toshiba TLP Installation
______ Secure all of the connector screws.
System 4xi Series – Toshiba TLP 710U/711U Projector Connections
COM Adapter
26-474-01
____________ In a rack mount, do NOT allow the weight of the cables to be supported by the
Extron • System 4 xi Switcher Series • User's Manual • P/N 68-427-02 Rev. B
6. Plug the 15-pin HD connector of the Projector Communications Extension cable
into the PJ Comm port on the System 4xi.
7. Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV
cable onto the System 4xi output. Then connect the 15-pin male connector on
the other end of the RGBS/HV cable into the "RGB1 IN" port of the projector.
Use the illustration below as a guide when connecting the System 4xi to a
Toshiba 710U/711U projector. Refer to Toshiba documentation to continue the
installation.
15-pin
9-pin
CC 50'
System 4 xi . See page 2-5 for cabling guidelines.
Configuration and Connections
15-pin
Page 2
Advertisement
