Yamaha SRCD User Manual page 66

CHAPTER2 PROFIBUS Unit
1) Press (SYS) on the initial screen.
F3
2) Press (next) to switch to the func-
F4
tion display. When the function display
appears, then press
3) Press (next) to switch the function
F4
display. To directly send the external par-
allel I/O input to the master sequencer
(PLC) press
F1
send the input from the master sequencer
(PLC) to the external parallel I/O, press
(S→DO).
F2
4) This is the screen when
was selected above in step 3). The DI15 -
DI0 current settings appear on the screen
from the left side. Here, "0" indicates
normal status, and "1" indicates a emu-
lated serialization setting.
To change a setting, press the function key
displaying the DI No. you want to set. If
the DI No. you want to set is not shown,
just press the
F4
as needed to select DI3 - DI15.
5) This is the screen when
was selected above in step 3). The DO12
- DO0 current settings appear on the
screen from the left side. Here, "0" indi-
cates normal status, and "1" indicates a
emulated serialization setting.
To change a setting, press the function key
displaying the DI No. you want to set. If
the DI No. you want to set is not shown,
just press the
F4
as needed to select DO3 - DO12.
6) Press the key to return to the screen
ESC
in step 3).
(OPT).
F2
(D→SO). To directly
(D→SO)
F1
(next) as many times
(S→DO)
F2
(next) as many times
60
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1SAFE2OPT 3UTL 4next
[SYS-OPT]
select menu
1D→SO2S→DO3 4next
[SYS-OPT-D→SO]
DI 00001111 00000000
DI→SO connect
1DI0 2DI1 3DI2 4next
[SYS-OPT-S→DO]
DO 00011 00000000
SI→DO connect
1DO0 2DO1 3DO2 4next
[SYS-OPT]
select menu
1D→SO2S→DO3 4next