Other Operations; Serial I/O Display - Yamaha SRCD User Manual

2-13

Other operations

2-13-1

Serial I/O display

Serial I/O (input/output) status can be displayed on the screen. Both initial screen and
OPRT screen are used for display.
1) Press
2) Since the parallel input/output state con-
tinues displayed, press
For the display meaning of the parallel
input/output status, refer to "How to see
the screen" in "Instruction Manual for
Controller".
3) The serial input/output statuses of Qn+1.7
to Qn.0, Qn+3.7 to Qn+2.0, Im+1.7 to
Im.0 and Im+3.7 to Im+2.0 are continu-
ously displayed from the upper row.
4) Press
will be switched to the serial input/output
status display of Qn+5.7 to Qn+4.0,
Qn+7.7 to Qn+6.0, Im+5.7 to Im+4.0 and
Im+7.7 to Im+6.0.
F4
(MON) on the initial screen.
here.
DIO
above in 3), and the display
DIO
131
CHAPTER2 PROFIBUS Unit
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
DI 10000000 00000000
10000000
DO 00000000 10100000
XO:1 YO:1 XS:1 YS:1
SI 10000000 10000000
00000000 00000000
SO 10100000 01000001
00000000 00000000
SI 00000000 00000000
00000000 00000000
SO 00001000 00000000
00000000 00000000