Removing The Dual Hard Drive Bezel Blank; Removing A Hot-Plug Sas Hard Drive; Installing A Sas Hard Drive - HP DL360 User Manual

Removing the dual hard drive bezel blank

CAUTION:
all bays are populated with either a component or a blank.
Remove the component as indicated.

Removing a hot-plug SAS hard drive

CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
1.
SATA hard drive LED
Back up all server data on the hard drive.
2.
Remove the hard drive.
3.

Installing a SAS hard drive

Remove the hard drive blank
1.
To prevent improper cooling and thermal damage, do not operate the server unless
For proper cooling do not operate the server without the access panel, baffles,
combinations" on page 17).
("Removing hard drive blanks" on page 47).
Hardware options installation 48
("SAS and