Hard Drive Blackplane Option - HP DL360 User Manual

Install fan modules 3 and 4.
13.
Install the air baffle (on page 23).
14.
Install the BBWC battery pack, if removed
15.
Install the access panel (on page 22).
16.
Slide the server into the rack.
17.
Power up the server (on page 20).
18.

Hard drive blackplane option

When the hard drive backplane option is installed, the server does not support the DVD-ROM or DVD-RW
drive options.
To install the component:
Power down the server (on page 20).
1.
Extend the server from the rack (on page 20).
2.
Remove the access panel (on page 22).
3.
Remove the hard drives from bays 1 and 2.
4.
Remove the hard drive bezel blanks from hard drive bays 5 and 6
5.
blanks" on page 47).
Remove the dual hard drive bezel blank
6.
("Installing the BBWC battery
("Removing the dual hard drive bezel
pack" on page 58).
("Removing hard drive bezel
blank" on page 48).
Hardware options installation 52