Memory Configurations - HP DL360 User Manual

The memory subsystem may be populated with either RDIMMs or UDIMMs, but mixing the two types is not
supported. To determine DIMM characteristics, use the label attached to the DIMM and the following
illustration and table.
Item Description
1 Size
2 Rank
3 Data width
4 Memory speed
5 DIMM type
For the latest supported memory information, see the QuickSpecs on the HP website
(http://www.hp.com).

Memory configurations

To optimize server availability, the server supports the following AMP modes:
•
Advanced ECC—provides the greatest memory capacity for a given DIMM size, while providing up
to 8-bit error correction, depending on the specific DIMM type. This mode is the default option for
this server.
•
Mirrored Memory—provides maximum protection against failed DIMMs. Uncorrectable errors in one
channel are corrected by the mirror channel.
•
Lockstep—provides enhanced protection while making all installed memory available to the
operating system. The server can continue to function if a single- or mulit-bit memory failure within a
single DRAM device occurs.
Definition
—
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
x4 = 4-bit
x8 = 8-bit
10600 = 1333-MHz
8500 = 1067-MHz
R = RDIMM (registered)
E = UDIMM (unbuffered with ECC)
Hardware options installation 41