Message
"Self checking..."
"XXX is not responding."
(This message may appear
while you are using the
Smart Operation Panel.
"XXX" in this message
indicates the function is
being used.)
When There Is a Problem Scanning or Storing Originals
Message
"Cannot detect original size.
Select scan size."
Causes
The machine is performing
image adjustment
operations.
The machine is busy
processing data.
Causes
The machine failed to detect
the size of the original.
When Other Messages Appear
Solutions
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
get ready.
To continue the current job, press
[Wait]. To stop the current job, press
[Force close].
Solutions
• Place the original correctly.
• Specify the scan size, and then
place the originals again. For
details about the settings for when
fax function is being used, see
"Scan Settings", Fax.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the exposure
glass cover or ADF triggers the
automatic original size detection
process. Lift the ADF by 30
degrees or more.
225