Ricoh MP 2553 User Manual page 180

10. Troubleshooting
Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Cannot print in duplex
mode.
Cannot print in duplex
mode.
An error has occurred when
the Address Book is
changed from the display
panel or Web Image
Monitor.
178
Causes
Paper of undetectable size
has been loaded.
There is a foreign object on
the finisher tray.
You have selected a paper
tray that is not set for duplex
printing.
You have selected a paper
type that cannot be used for
duplex printing.
The Address Book cannot be
changed while deleting the
multiple stored documents.
Solutions
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting.
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. For details about
specifying paper size with the
control panel, see "Changing to a
Size That Is Not Automatically
Detected", Paper Specifications
and Adding Paper.
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting.
• Do not place anything on the
finisher tray.
Change the setting for "Apply Duplex"
in [Tray Paper Settings] to enable
duplex printing for the paper tray. For
details about setting "Apply Duplex",
see "Tray Paper Settings", Connecting
the Machine/ System Settings.
In [Tray Paper Settings], select a paper
type that can be used for duplex
printing. For details about setting
"Paper Type", see "Tray Paper
Settings", Connecting the Machine/
System Settings.
Wait a while, and then retry the
operation.