Table of Contents
Advertisement
6. Scan
11.
Press [Change] under "Login User Name".
12.
Enter the login user name of the destination computer, and then press [OK].
13.
Press [Change] under "Login Password".
14.
Enter the password of the destination computer, and then press [OK].
15.
Enter the password again to confirm, and then press [OK].
16.
Press [Folder].
17.
Check that [SMB] is selected.
18.
Press [Change] or [Browse Network], and then specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
19.
Press [Connection Test] to check the path is set correctly.
20.
Press [Exit].
If the connection test fails, check the settings, and then try again.
21.
Press [OK].
22.
Press [Exit].
23.
Close the initial settings screen.
• When using the standard operation panel
Press the [User Tools/Counter] key.
• When using the Smart Operation Panel
Press [User Tools/Counter] (
Locating the SMB folder manually
1.
Press [Change] under "Path".
2.
Enter the path where the folder is located.
For example: if the name of the destination computer is "User", and the folder name is "Share", the
path will be \\User\Share.
120
) on the top right of the screen.
Hide quick links:
Advertisement
Table of Contents
