When There Is A Problem Scanning Or Storing Originals - Ricoh MP 6503 User Manual

Message
"Following output tray is full.
Remove paper."
"Internal cooling fan is
active."
"Self checking..."

When There Is a Problem Scanning or Storing Originals

Message
"Captured file exceeded
max. number of pages per
file. Cannot send the
scanned data."
Cause
The output tray is full.
Large print runs will cause
the machine's interior to heat
up, triggering the cooling
fan.
The machine is performing
image adjustment
operations.
Cause
The maximum number of
pages per file has been
exceeded.
When Other Messages Appear
Solution
Remove paper from the output tray to
resume printing. If paper is destined for
the finisher shift tray, to prevent paper
from falling off the tray press the [Stop]
to suspend printing, and then remove
the paper. Press [Continue] on the
display panel to resume printing.
When using the multi-folding unit, the
number of sheets per copy paper stack
differs depending on the paper type
and fold type.
The fan will emit noise, but this is
normal and the machine will be
operable while the fan is running.
The amount of paper that can be
printed and the total operation time
until the fan starts running depends on
the temperature of the location at
which the machine is installed.
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
resume operation.
Solution
Reduce the number of pages in the
transmitted file, and then resend the
file. For details about the maximum
number of pages per file, see "Storage
Function", Scan.
207