Scan; Basic Procedure When Using Scan To Folder - Ricoh MP 2553 User Manual

6. Scan

This chapter describes frequently used scanner functions and operations. For the information not
included in this chapter, see Scan on the supplied CD-ROM.

Basic Procedure When Using Scan to Folder

• Before performing this procedure, refer to "Preparation for Sending by Scan to Folder", Scan and
confirm the details of the destination computer. Also refer to "Registering Folders", Connecting the
Machine/ System Settings, and register the address of the destination computer to the address
book.
1. Display the initial scanner screen.
• When using the standard operation panel
Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the
[Home] screen.
• When using the Smart Operation Panel
Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [Scanner] icon on the Home screen 4.
2. Make sure that no previous settings remain.
If a previous setting remains, press the [Reset] key.
CXX002
115