Thick Paper - Ricoh MP 2553 User Manual

Thick paper

This section gives you various details about and recommendations concerning thick paper.
When loading thick paper of 106–157 g/m
prevent misfeeds and loss of image quality.
• Store all your paper in the same environment - a room where the temperature is 20–25°C (68–
77°F) and the humidity is 30–65%.
• When loading thick paper into Trays 1–4, be sure to load at least 20 sheets. Also, be sure to
position the side fences flush against the paper stack.
• Jams and misfeeds can occur when printing on thick smooth paper. To prevent such problems, be
sure to fan smooth paper thoroughly before loading them. If paper continues to become jammed or
feed in together even after they are fanned, load them one by one from the bypass tray.
• When loading thick paper, set the paper direction according to its grain, as shown in the following
diagram.
Direction of paper
grain
• Select [Thick Paper] as the paper thickness for the tray in [Tray Paper Settings].
• Even if thick paper is loaded as described above, normal operations and print quality might still not
be possible, depending on the paper type.
• Prints might have prominent vertical creases.
• Prints might be noticeably curled. Flatten out prints if they are creased or curled.
Envelopes
This section gives you various details about and recommendations concerning envelopes.
• Do not use window envelopes.
• Misfeeds might occur depending on the length and shape of the flaps.
2
(28–42 lb. Bond), follow the recommendations below to
Large capacity tray
Paper trays
Not recommended
Recommended Paper
Bypass tray
(LCT)
161