Paper - Philips laserfax 825 User Manual

Chapter 1. Installation
insert card
10 Wait until
Push the Plug'n'Print card of the new toner cartridge
into the opening on the left side next to the paper
tray, with the contacts facing to the left. (Only the
starter cartridge can be used without inserting a
Plug'n'Print card.)
Should the error message
¡
card
appear on the display, you may have
inserted the Plug'n'Print card incorrectly. Th e con-
tacts must face to the left as you insert the card
into the machine.
11 It may take a moment to update the cartridge. When
the process is completed, the following appears on
the display:
action completed / remove card
12 Pull the Plug'n'Print card out of the fax machine.
You can interrupt the recharging process at any time by
simply pressing STOP. However, the toner level memo-
ry must be updated for each new toner cartridge. If you
have pressed the STOP key by mistake, you can restart
the recharging process as follows:
Press MENU/OK,
1
62
new black
2 Select with
yes
OK. Select with
¾
machine will ask you to insert the Plug'n'Print card.
If the toner level of your cartridge is low, then every time
you open and close the cover, the following question will
appears on the display.
Cannot read
and OK
, and confi rm with
¾
. After a short time, the fax
black=new?
appear on the display:
installed a new cartridge, press STOP. If you have in-
stalled a new cartridge, press OK and follow the descrip-
tion set forth above.
Displaying the Toner Level
Whenever you insert a new toner cartridge,
Æ
you must update the toner level memory of
your fax machine with the Plug'n'Print card that is
included with the new cartridge. Your fax machine
registers the extent of toner usage for every print-
out and calculates the toner level of the cartridge
based on this. Th e indicated toner level is only
meaningful if you update each new toner cartridge
with the Plug'n'Print card provided.
Press MENU/OK,
1
62
cart capacity
Select
2
with OK. Th e toner level of the toner cartridge is
indicated by a percentile value between 100 percent
(full) and 0 percent (empty).
Pressing C will return you to the previous menu step;
3
pressing STOP will return you to the root menu.

Paper

Before your fax machine will be ready to make copies
or receive faxes, you must load paper into the machine.
Use the following paper sizes: A4, 210 × 297 millimetres,
letter, 216 × 279 millimetres (8.5 × 11 inches), or legal,
216 × 356 millimetres (8.5 × 14 inches). Your fax machine
works with normal copier paper and with typewriter pa-
per (60 to 90 g/m 2 ). Please use only 90 g/m
legal-sized paper. You can use paper of all three sizes as
input documents and as output paper.
Loading Paper Size A4
Pull out the paper tray.
1
Separate the paper sheets by fanning them out,
2
then align them by tapping edge of the stack lightly
1. Installation 1. Installation
If you have not
and OK.
with and confi rm
¾
2 stock for
11