Loading Paper - Philips voice dect User Manual

3 Remove the old Plug'n'Print card from the
slot to the left of the ink fi lm compartment
(only the initial free ink fi lm does not have a
Plug'n'Print card).
Loading the ink film
1 Carefully remove the rubber rings from the
new ink fi lm. Take care not to damage the ink
fi lm.
2 Lay the large roll in the grooves provided
in the rear ink fi lm compartment. The blue
toothed wheel must be on the right-hand
side.
3 Now take the small roll and lay it in the front
ink fi lm compartment. Make sure that the
blue toothed wheel is on the right and the pin
on the left is inserted in the depressions.
10
4 Turn small roll forward to tension the ink fi lm.
Make sure that the ink fi lm is not creased.
5 Break out the new Plug'n'Print card and insert
it in the slot to the left of the ink fi lm com-
partments.
6 Close the machine by swinging the operation
panel forward, until it snaps shut.

Loading paper

Before you can copy documents, paper must
be loaded in your fax machine. Please use
only the following paper format: standard
A4 210 × 297 mm. The fax machine works with
normal paper used for writing and copying and
has been optimised for smooth 80 g/m² paper.
The smoother the paper surface the better the
print quality.