Lexmark T430 - Lexmark MS610dn Manual

Printer specifications

Lexmark T430

The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We
do not recommend using vinyl or polyester labels.
The Lexmark T430 supports stocks from 60–163 g/m
dual‑web or integrated labels and 10 sheets of card stock.
The following tables list the maximum weights supported by Tray 1 and the multipurpose feeder.
Paper source
Tray 1
Multipurpose Feeder*
* Card stock can only be fed from the multipurpose feeder and must always exit to the rear output bin.
Label type
Paper
Integrated
Dual web
‑ indicates support
X ‑ indicates no support
Note: Do not place over 100 label sheets in the standard tray or over 30 label sheets in the multipurpose feeder.
Warning—Potential Damage: Feeding labels from print media sources that are not supported may damage your printer.
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150 ‑ 250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing
degradation.
Card stock Weight:
Note: Always use the rear exit when printing on card stock. To minimize curl, use the rear exit when printing on labels.
2
(16‑43 lb). The multipurpose feeder can feed up to 30 sheets of
Index Bristol
Standard tray
X
X
X
76.2–216 mm (3.0–8.5 in.)
127–355.6 mm (5–14 in.)
Up to 199 g/m
Up to 0.25 mm (0.01 in.)
100–400* Sheffield
Up to 163 g/m
Up to 163 g/m
—
2
60–163 g/m (16–43 lb)
Multipurpose feeder
2
(53 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
Tag Cover
— —
—
Optional trays
X
X
X
87